Too high temperature will affect the controllability of the CNC system of the metal laser cutting machine

Metal laser cutting machine is a professional equipment that uses laser technology to transform metal.Relevant staff whooften use metal  laser cutting machine should know that its effect is affected by many factors, such as the most common temperature. Everyone will explain in detail the impact of temperature on the metal laser cutting machine.

Generally speaking, the main key component of numerical control is the numerical control system,  its working environment is generally between -5 degrees  +70 degrees. In this temperature range, high temperature is lower than low temperature in the metal laser cutting machine,  the temperature is too high. At the end, it can be led to the trachea  the cable is easy to break,  it is caused by failures such as air leakage  poor connection!

For the motor of the metal laser cutting machine, the impact is  big, because the metal laser cutting machine rarely uses liquid lubricants, so there will be no freezing point on the scene, so rest assured! In any case, if conditions permit, it is better to ensure that the workshop temperature is above 0 degrees. It should  be too low. Working in a long-term low temperature state can easily cause excessive mechanical wear  premature aging!

When using the metal laser cutting machine, the temperature should  be too high, which will affect the controllability of the CNC system,  it will cause problems such as crashes  slow response. Therefore, it is very necessary to use the metal laser cutting machine at an appropriate temperature.

If you want the metal laser cutting machine to exert its normal effect, it is very important to maintain an appropriate temperature, which will also extend the service life of the metal laser cutting machine. Therefore, the operator must pay enough attention to this aspect.