How to avoid the performance degradation of metal laser cutting machine?

After the metal laser cutting machine has been running for a long time, the processing performance will be reduced, the cutting speed will be slow,  the accuracy effect will be poor. If the machine runs for a long time, there will definitely be loss, then we should have this situation. How to do? The following Jun Yi editor will come to analyze it for everyone.

 Metal laser cutting machine

　　In general, the performance of laser cutting equipment produced by different laser cutting machine manufacturers is also different, mainly because of different configuration structures  different processing techniques. The influence of external factors cannot be ruled out. The main reason for the performance degradation is mainly caused by long-term wear of parts. If the maintenance is  carried out for a long time, the problem will be very obvious. So how can we avoid the degradation of the processing performance of fiber laser cutting machine  ?

　　First of all, the maintenance of the metal laser cutting machine will affect the processing performance. The laser cutting machine has been processing for a long time,  many parts will wear out, so it will inevitably affect the performance of the processing equipment. However, the laser cutting machine has many more precise core components, especially The optical components must be wiped clean after use to maintain the smoothness of the optical components so as  to affect the next use. In addition, the bearings in various parts of the equipment should be lubricated regularly to maintain the flexibility of the drive  the processing accuracy. Secondly, avoid the impact of strong vibration equipment. In the process of processing, it is necessary to avoid the impact of external vibration equipment. The obvious shaking of the ground will have a great impact on the processing accuracy of precision mechanical equipment.

　　Lens maintenance: After the machine works for a period of time, the lens will stick a layer of ash on the surface due to the working environment, which will reduce the reflectivity of the reflective lens  the light transmittance of the lens,  ultimately affect the working power of the laser. The maintenance method is to gently wipe the surface of the lens in a clockwise direction with absorbent cotton  ethanol to wipe off the dust.

　　Clean the moving parts of the fiber laser cutting machine, so that the machine can maintain an excellent working state. The specific methods are as follows:

 　　1. Fill the screws with a little lubricating oil, including the laser tube support  the screws on a reflector, which can be easily disassembled during maintenance. Note: Do  add lubricating oil to timing belts, energy chains, air pipes, motors, sensors  lenses, wires.

 　　2. No items can be placed in the machine to avoid unnecessary damage to the machine.

 　　3. Use cotton cloth to clean the dust  foreign objects on the metal oil tanker, metal shaft, slider  linear guide, add lubricating oil,  carry out the reciprocating movement in empty line. The processing performance of the laser cutting machine is mainly related to the strength of the laser cutting machine manufacturer,  the price of the laser cutting machine is very expensive. If the maintenance is  performed frequently, the loss to the enterprise is very large. The method can  only maintain the performance of the laser cutting machine, but also extend the service life of the laser equipment.

Factory proofing samples

　　The above is all about how to avoid the performance degradation of the metal laser cutting machine. I hope that everyone will pay attention to the production efficiency  pay attention to regular maintenance  cleaning of the equipment when operating the metal laser cutting machine. I hope this article will help everyone.