Tips on the use maintenance of fiber laser cutting machine?

Proficient in the protection technology of fiber laser cutting  starting protection, in order to better play the function of the equipment,  improve the working efficiency of the equipment to a great extent. The following is a brief introduction to the fiber laser cutting startup  maintenance process:

 1 ) Check the straightness of the track  the straightness of the machine every six months,  find that it is abnormal  timely protect  debug. Otherwise, it may affect the cutting effect, the error will be added,  the cutting quality will decrease.

 2 ) Always check the steel belt  make sure to tighten it. Otherwise, if something goes wrong during operation, it may hurt people. The steel belt seems inconspicuous, but something should  be underestimated.

 3 ) Use a vacuum cleaner to remove the dust  dirt in the machine once a week. All electrical cabinets should be tightly closed to prevent dust.

 4 ) The guide rails should be sorted out frequently to remove dust  other debris to ensure the normal operation of the equipment. Racks should be wiped often,  smooth oil should be added to ensure smooth  free of debris. The guide rails  motors should be sorted  smoothed frequently, so that the machine can better position  cut more accurately while traveling,  the quality of the cut products will improve.

 5) The beginning of the dual focal length laser cut is a vulnerable item on the start of the laser cutting. Long-term use will easily damage the beginning of the laser cut.

 　　Fiber laser cutting needs to be checked  repaired regularly. If there is any deformation  other appearances, you should realize that the beginning of the laser cutting has been damaged a little,  you need to replace it. If it is  replaced in time, it will affect the cutting quality, increase the cost,  some products may need to be processed again, reducing production efficiency. Bystronic laser cutting  starting is relatively more stable  more useful; but also reminds you: the knife does  cut the woodworker by mistake, regular protection  maintenance of the laser cutting  starting, the ability to reduce the production cost To improve economic efficiency.